
Intraoral Cameras: MouthWatch, DEXIS, Acteon Compared
Intraoral cameras compared on focus, capture, and software: MouthWatch, DEXIS, Acteon, Digital Doc, and Carestream.
Reviewed by Dr. Sean Myran, DMDDoctor of Dental Medicine, University of Pennsylvania
How we rank explains how these product lists are ordered.
An intraoral camera is a patient-communication tool with a clinical side effect: it records what you saw on a cracked cusp, an open margin, or inflamed tissue. It is not a radiograph and it is not an impression scanner. Buy it when you want the patient to see the same surface you are looking at, and when the image needs to land in the chart without a workaround.
How to choose an intraoral camera

- Focus. Autofocus is easier for a team that shares the camera. Fixed-focus wands are simpler and cheaper, and they punish a shaky working distance.
- Capture. A button on the wand beats reaching for a mouse. Confirm the image files into the practice-management or imaging software you already use.
- Wand size. A slim head reaches second molars. A larger head can carry a better sensor and still be miserable on a small mouth.
- Cord and infection control. USB wands need a sleeve that does not smear the lens. Cordless models trade the cord for a battery and a dock.
- Extras you will use. Caries-fluorescence or periodontal modes are useful only if the team will turn them on. They are not a reason to buy a camera the team will leave in a drawer.
How common cameras differ

| Brand | Known for | Best fit | Watch for |
|---|---|---|---|
| MouthWatch | A widely sold USB camera aimed at case presentation | Offices that want a straightforward wand and a lower entry cost | Confirm it writes images into your charting software |
| DEXIS | DEXcam, built to sit next to DEXIS imaging | Practices already on DEXIS sensors | Less attractive if you are not in that software |
| Acteon | SoproCare, with daylight, caries, and perio image modes | Offices that will use the diagnostic viewing modes | The modes only help if the team is trained on them |
| Digital Doc | IRIS cameras, long sold as a dedicated intraoral wand | Practices replacing an older Digital Doc unit | Check sheath fit and software capture on the current model |
| Carestream Dental | CS 1200 and CS 1500 cameras in the CS imaging family | Offices already on Carestream imaging | Match the camera to the software version you run |
| Dentsply Sirona | SiroCam, tied to Sidexis | Practices that want the camera in the same database as their X-rays | Do not assume a SiroCam is the right wand if imaging lives elsewhere |
MouthWatch
MouthWatch is the camera many offices meet first because the wand is simple and the price is easier than a camera bundled into a full imaging system. The test that matters is whether a captured frame lands in the patient record your team already has open.
DEXIS
DEXcam is the companion to DEXIS sensors and DEXIS imaging software. If radiographs already live there, the camera should too. If they do not, you are buying a second imaging home.
Acteon SoproCare
SoproCare’s distinction is the viewing modes: a daylight image, a caries mode, and a periodontal mode. Those are useful in hygiene conversations when the team knows what the colors mean. They are clutter if nobody is trained.
Digital Doc
The IRIS line is a purpose-built intraoral camera, not a webcam in a sleeve. Offices replacing an older Digital Doc usually stay with the brand because the capture habit is already in the operatory. Confirm the current sheath and the software plugin before you reorder “the same camera.”
Carestream and Sirona
Carestream’s CS cameras and Sirona’s SiroCam are at their best inside CS Imaging and Sidexis. Buy them when the radiograph database is already that brand. A camera that cannot file the image without an export step will not get used between patients.
Related guides
- Imaging equipment
- X-ray supplies and accessories
- Intraoral scanners for digital impressions
What infection-control guidance applies
The CDC’s dental sterilization and disinfection summary sorts patient-care items by where they touch the patient. Critical items penetrate soft tissue or bone and are heat sterilized. Semicritical items contact mucous membranes or non-intact skin. The mouth is a mucous membrane, so a camera wand that is placed in the mouth sits in that semicritical group. The CDC says most semicritical dental items are heat-tolerant and should be heat sterilized. If an item is heat-sensitive, the CDC says to replace it with a heat-tolerant or disposable alternative when one exists. If none exists, high-level disinfection is the minimum, and the manufacturer’s instructions decide what that device can actually tolerate.
The same page uses digital radiography sensors as the worked example, not cameras, and the point transfers: these devices vary by manufacturer. If a sensor cannot be heat sterilized or high-level disinfected, the CDC’s minimum is an FDA-cleared barrier during use, then cleaning and disinfection with an EPA-registered hospital disinfectant that has an intermediate-level, tuberculocidal claim. A camera quote should be read the same way. Ask for the reprocessing instructions before you compare image quality. The CDC’s key recommendation is direct: if the manufacturer does not provide reprocessing instructions, the device may not be suitable for use on more than one patient.
Clinical contact surfaces are a separate CDC category. Light handles, bracket-tray touches, and switches are examples of surfaces that transfer microorganisms when they are touched. Surfaces that are hard to clean should be covered with a barrier that is changed between patients. A camera dock, a cord, and a capture button in the operatory are in that conversation even when the wand itself has its own instructions.
Camera questions
Is an intraoral camera the same as an intraoral scanner?
No. A camera takes a picture the patient can look at. A scanner records a 3D surface for a crown, aligner, or denture. They solve different problems.
Can one camera serve every operatory?
Yes, if it is cordless or on a long enough cord and the software is on every computer. Most offices that present treatment in more than one room end up with a camera in each room, because a shared wand stays at the front desk.
Does the CDC name a disinfection method for intraoral cameras?
Not by product type. The CDC classifies items that contact mucous membranes as semicritical and says to follow the manufacturer’s reprocessing instructions. If those instructions are missing, the CDC says the device may not be suitable for multi-patient use.
Sources
Centers for Disease Control and Prevention
Sterilization and Disinfection. Dental Infection Prevention and Control.
Updated May 15, 2024cdc.gov (opens in a new tab)
Related articles
Keep exploring related topics from Dental Country.

Panoramic X-ray Units: Planmeca, Vatech, Carestream
2D panoramic versus combo CBCT, ceph, and patient positioning, and how Planmeca, Dentsply Sirona, Vatech, Carestream, and DEXIS differ.
Read article
Phosphor Plate Systems: ScanX, VistaScan, Xios Scan
Phosphor plate systems: reusable plates, a reader that is not the x-ray head, and how ScanX, Xios, and Pspix differ.
Read article
Dental X-ray Sensors: DEXIS, Schick, Carestream, Vatech
X-ray sensor size, cable, and software lock-in, and how DEXIS, Dentsply Sirona, Carestream, and Vatech differ from phosphor plates.
Read article
Dental CBCT Systems: Field of View, Dose and Brands
CBCT field of view, voxel size, and 2D modes, and how Planmeca, Dentsply Sirona, Carestream, Vatech, DEXIS, and Morita differ.
Read article
