Dental Country — all about dentistry
A round off-white CAD/CAM milling disc with a center mounting hole.
Last Updated: 11/17/2026

CAD/CAM Discs: Zirconia, PMMA and Wax Compared

Zirconia, PMMA, wax, and denture-blank CAD/CAM discs, and how NexxZr, Lucitone, and inCoris differ.

Dr. Sean Myran, DMD

Reviewed by Dr. Sean Myran, DMDDoctor of Dental Medicine, University of Pennsylvania

How we rank explains how these product lists are ordered.

A CAD/CAM disc is the blank a mill cuts. It is not the mill. The milling machine guide is the machine, including the difference between a wet glass-ceramic block and a dry zirconia disc that still has to be sintered. This page keeps the discs already listed: Sagemax NexxZr zirconia, Sagemax PMMA, ZCAD wax and temp discs, Lucitone Digital Fit, and inCoris TZI C.

How to choose a CAD/CAM disc

An opaque off-white zirconia-like disc beside a gray polymer-like disc, both with center holes.
A thicker, slightly larger disc beside a thinner, smaller-diameter disc, both with center holes.
  • Material. NexxZr T, NexxZr T Multi, NexxZr +, and inCoris TZI C are zirconia on this page. Sagemax PMMA and the Lucitone disc are the polymer rows. Lucitone is listed as a denture disc made from hybrid composite materials the listing also calls PMMA. ZCAD Wax Press is modeling wax for cast and press. ZCAD Temp Esthetic is listed for long-term esthetic restorations. A zirconia disc is not a PMMA temporary.
  • Size and thickness. NexxZr rows here are W98 or Z95. PMMA is the 12 mm disc. The zirconia thicknesses listed are 14, 16, 18, and 20 mm. ZCAD wax, ZCAD Temp Esthetic, and Lucitone are listed at 98.5 mm. inCoris TZI C is listed at 98 mm. The NexxZr listing says those discs fit Wieland Zenotec, Röders, Organical, Zirkonzahn, and Amann Girrbach Ceramill, and most open systems. Confirm the holder. This page does not add a machine compatibility that the listing did not name.
  • Strength figures stay on the listing. NexxZr T and NexxZr + rows are listed at 1,270 MPa. NexxZr T Multi is listed at 1,170 MPa cervical and 630 MPa incisal, shade D4, 16 mm, for a shade and translucency gradient. PMMA, wax, Lucitone, ZCAD Temp Esthetic, and inCoris do not have a flexural strength on this page.

How these discs differ

DiscMaterialSize on this pageWhat the listing adds
NexxZr T MultiZirconiaW98, shade D4, 16 mm1,170 MPa cervical, 630 MPa incisal. Shade and translucency gradient for monolithic or reduced restorations
NexxZr TZirconiaC2 in Z95 at 16 mm, C3 in W98 at 14 mm, B4 in W98 at 18 mm1,270 MPa. Single crowns to full-arch bridges. Named mill families and open systems
NexxZr +ZirconiaW98, shade A2, 20 mm1,270 MPa. Same crown-to-full-arch indication on the listing
Sagemax PMMAPMMAW98, shade B1, 12 mmColor-stable temporary. Listing says it is easy to polish
ZCAD Wax Press 98Modeling wax98.5 mm for WielandCast and press. Listing says it fits open systems that accept a 98 mm disc
ZCAD Temp EstheticNot given a chemistry beyond the temp name98.5 mmListed for long-term esthetic restorations. No strength figure
Lucitone Digital FitHybrid composite the listing also calls PMMA98.5 mm, 20 mm thickDenture disc for a Lucitone Digital mill denture. Listing says it fits 5-axis mills
inCoris TZI CZirconia98 mmListed for fully anatomical crowns and bridges. No strength figure on this page
Strengths, shades, and diameters are the disc listings already published on this page.

Zirconia discs

NexxZr T Multi is the gradient disc: D4, 16 mm, with the 1,170 / 630 MPa split. The other NexxZr rows share the 1,270 MPa figure and differ by shade and thickness: C2 at 16 mm in Z95, C3 at 14 mm in W98, B4 at 18 mm in W98, and NexxZr + in A2 at 20 mm. inCoris TZI C is the 98 mm zirconia disc listed for fully anatomical crowns and bridges, without a megapascal figure here. The mill still has to be a dry zirconia workflow if that is what the milling guide is describing. Sintering is not done by the disc.

PMMA, wax, and the temp disc

Sagemax PMMA at 12 mm, shade B1, is the temporary disc. Lucitone Digital Fit is the denture disc at 98.5 mm and 20 mm thick, for 5-axis mills on the listing. ZCAD Wax Press is the 98.5 mm wax for casting and pressing, including Wieland. ZCAD Temp Esthetic is the other 98.5 mm disc, listed for long-term esthetic restorations without a strength number. Do not order the wax disc for a zirconia bridge or the PMMA disc for a sintered zirconia crown. A denture PMMA disc is also not the heat-cure powder or the chairside repair acrylic. Milled discs versus Lucitone 199, pour resins, and self-cure repairs are the denture acrylic guide.

CAD/CAM disc questions

Is a PMMA disc a zirconia disc?

No. On this page PMMA is the Sagemax temporary and the Lucitone denture material. NexxZr and inCoris TZI C are the zirconia rows. The strengths above are only on the NexxZr listings.

Will every disc fit every mill?

The NexxZr listing names Wieland Zenotec, Röders, Organical, Zirkonzahn, Ceramill, and most open systems. Wax Press is listed for 98 mm open systems and for Wieland. Lucitone is listed for 5-axis mills. Z95, W98, 98 mm, and 98.5 mm are different sizes on this page. Match the holder.

Sources

  • Product listings previously published on this page

    Diameters, thicknesses, shades, the 1,270 MPa and 1,170 / 630 MPa figures, and the mill families named for NexxZr are those listings.

Keep exploring related topics from Dental Country.