
Denture Acrylics: Lucitone 199, Nature-Cryl, Unifast
Denture acrylics for every job: Lucitone 199 heat-cure bases, chairside relines, self-cure repairs, and milled PMMA discs.
Reviewed by Dr. Sean Myran, DMDDoctor of Dental Medicine, University of Pennsylvania
How we rank explains how these product lists are ordered.
How to Choose a Denture Acrylic
These five products do not compete for the same job, even though they are all acrylic. Lucitone 199 is a heat-cure high-impact denture base for a new full or partial denture processed in the lab. Tokuyama Rebase II Fast is a chairside hard reline, not a base resin and not a heat-cure. Nature-Cryl Pour is a fluid self-cure for pour processing and repairs. Unifast Trad and Jet Tooth Shade are self-cure powders for repairs, additions, and provisional crowns — Jet is tooth-colored, so it will not replace pink base.

Start with the broken thing in your hand. A fractured base on a patient who has already broken two dentures is a Lucitone 199 (or another high-impact heat-cure) conversation with the lab, not a chairside sprinkle of repair acrylic. A loose denture with healthy ridges can be a Tokuyama hard reline the same day. A missing denture tooth is Jet or a tooth-shade Unifast, not a pink pour resin. Mixing those up is how a “repair” becomes a remake. A milled CAD/CAM denture disc is a different purchase again. It is covered with the heat-cure and self-cure jars below, and the disc sizes are on the CAD/CAM disc guide.

Buying criteria that actually change the outcome
- Heat-cure base vs self-cure repair — high-impact heat-cure (Lucitone 199) is for strength and a new base. Self-cure powders set in the chair or on the bench and are for repairs, additions, and temporaries. They are not interchangeable.
- Reline vs rebase vs repair — Rebase II Fast hard-relines the tissue surface of an existing denture, chairside, in minutes. It does not build a new base from scratch.
- Pour technique vs pack-and-press — Nature-Cryl Pour is fluid so it can be poured into a mold. Lucitone 199 is the classic pack-and-heat base. Pouring is faster; high-impact heat-cure is what you specify when the patient fractures bases.
- Pink base vs tooth shade — Jet Tooth Shade and tooth-shade Unifast repair teeth and make provisionals. Pink powders repair base. A tooth-shade repair in the middle of a flange looks like a mistake because it is one.
- Monomer in the mouth — heat-cure keeps most of the monomer reaction in the lab. Chairside self-cures and hard relines have taste, heat, and allergy issues. Rebase II Fast is marketed as MMA-free with low heat; traditional Jet and Unifast are not that claim.
| Product | Maker | How it cures | Actual job | Watch-out |
|---|---|---|---|---|
| Lucitone 199 | Dentsply Sirona | Heat-cure | High-impact denture base for full and partial dentures | Not a chairside repair powder. Lab process. |
| Rebase II Fast | Tokuyama | Self-cure, intraoral, about five minutes | Hard reline of full and partial dentures | Not a new base. Not a heat-cure, despite older write-ups. |
| Nature-Cryl Pour | GC | Self-cure pour resin | Poured bases, relines, and repairs | Pour convenience is not high-impact heat-cure strength. |
| Unifast Trad | GC | Self-cure powder/liquid | Provisionals, repairs, additions | Traditional MMA self-cure: heat, odor, and shade must match the job. |
| Jet Tooth Shade | Lang | Self-cure tooth-color acrylic | Provisional crowns and denture-tooth repairs | Wrong powder for a pink base repair. |
The lab side of this work: denture flasks and presses · denture liners and conditioners · CAD/CAM discs, including denture PMMA
1. Lucitone® 199 — Dentsply Sirona

Dentsply Sirona Lucitone 199 is a premium heat-cure denture base resin. Dentsply describes it as the high-impact, high-flexural-strength choice for tissue-supported and implant-supported full and partial dentures, with a tissue-like esthetic and a long clinical history. The powder/liquid is processed in a flask with heat. That is a laboratory base, not a chairside sprinkle-on repair.
Specify it when the patient fractures bases, clenches, or is going onto implants where a broken denture is expensive. Impact resistance is the buying criterion Dentsply leads with. There is a separate Lucitone 199 repair material for fixing a Lucitone base later; the jar in this ranking is the denture base itself. A pour acrylic (Nature-Cryl, or Dentsply’s later high-impact pour, Lucitone HIPA) is a different process if the lab needs speed instead of the classic heat-cure.
Who it is for: Dentists and labs prescribing a new full or partial denture base when fracture resistance matters more than a same-day pour.
Tradeoff: Heat-cure means a processing cycle, a flask, and a return visit. It will not reline a sore spot this afternoon — that is Rebase II Fast or a tissue conditioner. Do not call Lucitone 199 a “repair resin” in the chart just because the page title says denture repair.
2. Tokuyama Rebase II Fast

Tokuyama Rebase II Fast is a chairside hard denture reline for full and partial dentures. Tokuyama’s product page describes it as MMA-free, odorless, and low-heat, curing completely in the mouth in about five minutes without an inhibition layer. It is a direct hard reline, including after a soft liner once the tissue has healed. It is not a heat-cure, and it is not a material you pack into a flask to make a new base.
Use it when the denture fits the teeth and the occlusion but the tissue surface has drifted — resorption, a healed extraction site, a liner that has aged out. The patient leaves with the same denture, hard-relined. That is a different appointment from sending Lucitone 199 to the lab, and a different chemistry from a pink self-cure repair of a midline fracture.
Who it is for: Practices that hard-reline complete and partial dentures chairside and want Tokuyama’s low-odor, low-heat intraoral set instead of a lab rebase.
Tradeoff: A hard reline on inflamed tissue locks in a bad impression of that tissue. Treat the mucosa first; Tokuyama lists the healed-ridge case, including after a soft reline. MMA-free is not the same claim as “no allergy to every component.” It will not replace a broken tooth or a fractured midline the way a repair acrylic does.
3. Nature-Cryl® Pour — GC America

GC America Nature-Cryl Pour is a fluid self-cure acrylic for poured denture bases, relines, and repairs. The pour technique — a hydrocolloid or silicone mold instead of pack-and-press — is the reason the resin is runny. GC sells it for offices and labs that want a pour-and-cure base or a repair without a heat-cure cycle.
Fluid resin buys time and a simpler flask. It does not automatically meet the high-impact story Dentsply tells for Lucitone 199. Choose Nature-Cryl when the case is a pour base, a lab reline, or a repair that suits a fluid mix. Choose a high-impact heat-cure when the patient’s history is broken dentures. Shade and fiber, if you use them, still have to match the existing base on a repair; a pour resin in the wrong pink is obvious.
Who it is for: Labs and dentists who pour bases or repairs and want GC’s fluid acrylic rather than a heat-cure pack.
Tradeoff: Pour acrylic can leave voids if the mold is poured too late or too cool, and self-cure bases are a common place to lose the strength you promised a bruxer. Do not describe this jar as a chairside five-minute reline; that procedure is Rebase II Fast. Do not describe it as Lucitone 199.
4. Unifast Trad — GC America

GC America Unifast Trad is a traditional self-cure powder-and-liquid acrylic. “Trad” is the classic cold-cure, as opposed to GC’s later pour or cartridge versions. Labs and dentists use it for provisional crowns and bridges, denture repairs, and additions such as a clasp area or a flange extension. It is available in tooth shades and pink, and the shade is the whole clinical decision.
It belongs in a repair kit, not in the same scoop as a high-impact heat-cure base. Mix ratio, moisture on the denture, and timing decide whether the repair bonds or pops off after a week. Monomer odor and heat are the ordinary self-cure problems; Unifast Trad is not marketed as MMA-free the way Rebase II Fast is. For a hard reline of the entire tissue surface, use a reline system. For a new base on a fractured-prone patient, write Lucitone 199 to the lab.
Who it is for: Clinics and labs that still do powder-liquid repairs and provisionals and want one GC self-cure with both tooth and pink shades.
Tradeoff: Traditional MMA self-cure can sting, smell, and get hot. A pink repair in a tooth, or a tooth-shade repair in a flange, is a shade error, not a brand error. Polymerization shrinkage and a contaminated fracture line are why some “quick fixes” return as lab remakes.
5. Jet® Tooth Shade — Lang Dental

Lang Jet Tooth Shade is a self-cure acrylic in tooth colors, long used for provisional crowns and for repairing or adding denture teeth. The powder/liquid sets on the bench or in a matrix. It is not a pink denture-base resin. If the flange is broken, Jet Tooth Shade is the wrong bottle even though the word “acrylic” is on the label.
The useful distinction from Unifast Trad is focus. Jet Tooth Shade is the tooth-colored provisional and denture-tooth repair acrylic. Stock the shades that match the denture teeth you actually see, not a full prosthetic shade guide you will never open. Self-cure exotherm and leftover monomer are the handling limits; a provisional left thick will cook the pulp and a denture-tooth repair left wet with saliva will debond.
Who it is for: Offices that make chairside provisionals and repair broken denture teeth with a self-cure tooth acrylic.
Tradeoff: No pink. No high-impact base. No five-minute hard reline. Jet will not turn a fractured midline into a Lucitone denture. Match the shade to the denture tooth under the operatory light you will dismiss the patient under, and pressure-pot the repair when the lab step is available if you care about porosity.
CAD/CAM denture PMMA
A milled denture base is cut from a puck or disc that was already polymerized. Heat-cure acrylic, Lucitone 199 on this page, is powder and liquid packed in a flask and cured with heat. Self-cure acrylic, Unifast Trad, Jet Tooth Shade, and Nature-Cryl Pour, sets on the bench or in a mold without that heat cycle. Rebase II Fast is a chairside hard reline, not a base. A milled disc does not replace any of those jars. It is a different way to get a base.
The blank is the purchase. A denture-base disc is not a temporary-crown PMMA disc and not a zirconia disc. Disc size, shade, and which of those materials is which are the CAD/CAM disc guide. On that page, Sagemax PMMA is the temporary disc and Lucitone Digital Fit is the denture disc. Order the denture disc when the prescription is a denture base. Order the temporary disc when the prescription is a temporary.
| Heat-cure base | Self-cure | Milled PMMA disc | |
|---|---|---|---|
| What you buy | Powder and liquid for a flask. Lucitone 199 | Powder and liquid, or a pour resin, or a hard-reline kit | A pre-polymerized puck or disc the mill cuts |
| When polymerization happens | In the lab, under heat, inside the flask | On the bench or in the mouth, without that heat cycle | At the factory, before the disc is milled |
| Usual job | A new full or partial denture base | Repairs, additions, provisionals, pour bases, chairside relines | A milled denture base. Teeth may still be bonded on with a separate acrylic |
| What to confirm | High-impact heat-cure versus a pour, and the shade | Pink base versus tooth shade, and reline versus repair | Denture disc versus temporary PMMA, the diameter the mill holds, and the shade |
Dentsply Sirona’s Lucitone Digital Fit instructions for use describe the disc as a PMMA denture base for partial and full dentures, 98.5 mm in diameter, for the 5-axis mills that size fits. The IFU says the disc meets ISO 20795-1 Type 1 Class 1, with flexural strength of at least 65 MPa and flexural modulus of at least 2000 MPa. The workflow in that IFU is not “mill a finished denture and dismiss.” The lab mills the base, bonds Dentsply denture teeth with Lucitone HIPA pour acrylic, then mills the disc again. Lucitone HIPA is a pour acrylic, the same family as the pour resins already on this page. A milled Lucitone base still has a self-cure step at the teeth.
The IFU also warns that the disc contains residual methyl methacrylate and can sensitize skin. Milled does not mean monomer-free. What the studies say about how much monomer comes out is narrower than the ads.
- Steinmassl and colleagues measured monomer release from finished CAD/CAM dentures milled from PMMA pucks that had been polymerized under high temperature and pressure, and from conventional heat-polymerized dentures. After 7 days in water, the milled dentures released very little monomer, and not significantly less than the heat-cured controls. The authors wrote that a difference might still show against autopolymerizing resins, which they called a less suitable base. The paper is in Clinical Oral Investigations (2017).
- A 2021 systematic review by Batisse and Nicolas describes milled discs as resin polymerized under high pressure and temperature, and reports that the included studies found better physical and mechanical properties for CAD/CAM resins than for conventional resins overall. On residual monomer, the review is more specific: milled discs were not uniformly lower once the teeth are bonded to the base with a PMMA agent, which can itself release monomer. The review also notes that ISO 20795-1:2013 allows a maximum residual monomer of 2.2% by weight. Clinical studies were still needed.
Read those as a buying limit, not as a winner. A milled puck can be a dense, industrially cured base. A finished denture milled from one is not automatically lower-monomer than a careful heat-cure, and a printed denture resin is a third process this section does not rank. Specify the disc the mill can hold, the shade, and whether the teeth are bonded with a pour acrylic. Keep a repair acrylic in the office either way. A fractured flange or a debonded tooth on a milled base is still Unifast, Jet, or the matching repair resin, not a reason to put Lucitone 199 in a pressure pot at the chair.
What to look for on a denture PMMA disc
- Indication. Denture base, not a temporary, not zirconia, not wax. The disc guide separates those rows.
- Size. Lucitone Digital Fit’s IFU is 98.5 mm. Other blanks on the disc guide are 98 mm, 98.5 mm, W98, or Z95. The holder has to match.
- Shade. The IFU tells the lab to select the shade. A tooth-shade PMMA disc is the wrong blank for a pink base, the same mistake as using Jet Tooth Shade on a flange.
- Published strength, if the maker prints one. Lucitone Digital Fit’s IFU states at least 65 MPa flexural strength and at least 2000 MPa flexural modulus, and names ISO 20795-1 Type 1 Class 1. A disc with no figure on the IFU does not inherit that number.
- How the teeth attach. If the system bonds teeth with a pour acrylic, that acrylic is part of the case. If you wanted a heat-cure base and a heat-cure tooth bond, say that to the lab. The mill does not imply it.
Frequently Asked Questions
Is Lucitone 199 a denture repair acrylic?
No. Lucitone 199 is a heat-cure high-impact denture base for fabricating full and partial dentures. Repairs and additions are self-cure acrylics such as Unifast Trad or a tooth-shade Jet, or Dentsply’s separate Lucitone repair material when you are matching a Lucitone base. A hard chairside reline is Tokuyama Rebase II Fast.
Is Rebase II Fast heat-cured?
No. Tokuyama Rebase II Fast is a self-cure chairside hard reline. The manufacturer describes an intraoral set of about five minutes, with low heat and an MMA-free formula. Older descriptions that called it a heat-cure were wrong.
When should I pour a base instead of packing Lucitone 199?
Pour resins such as Nature-Cryl are for labs that want a fluid self-cure in a mold: speed and a simpler process. Specify a high-impact heat-cure like Lucitone 199 when the patient fractures bases or the denture is implant-supported and strength is the prescription. They are different materials, not two brands of the same powder.
Which acrylic repairs a broken denture tooth?
A tooth-shade self-cure: Jet Tooth Shade, or tooth-shade Unifast Trad. Pink base acrylic and pour base resin restore the flange, not the tooth. Match the shade and keep saliva out of the fracture.
When is a milled PMMA disc the denture acrylic?
When the lab is milling a denture base from a pre-polymerized puck, not packing Lucitone 199 in a flask and not repairing a tooth at the chair. Lucitone Digital Fit is that disc: 98.5 mm, PMMA, for partial and full dentures, on the CAD/CAM disc guide. Dentsply’s instructions still bond the teeth with Lucitone HIPA pour acrylic and warn that the disc contains residual monomer. A repair of that base is still a self-cure. Steinmassl and colleagues did not find that finished milled dentures released significantly less monomer than a conventional heat-cure.
Read next
Stay on removable prosthodontics:
- Denture liners and conditioners
- Other denture base materials
- Denture flasks and presses
- Alginate impression materials
- Resin cements for fixed work
Sources
Dentsply Sirona, Lucitone Digital Fit denture disc instructions for use
PMMA partial and full dentures, 98.5 mm, ISO 20795-1 Type 1 Class 1, flexural strength at least 65 MPa, flexural modulus at least 2000 MPa, bond teeth with Lucitone HIPA, residual methyl methacrylate warning. Product page . IFU: LAB-IFU-Lucitone-Digital-Fit, Dentsply Sirona.
Steinmassl PA, et al
Do CAD/CAM dentures really release less monomer than conventional dentures? Clinical Oral Investigations. 2017;21(5):1697-1705. PMC5442236 .
Batisse C, Nicolas E
Comparison of CAD/CAM and Conventional Denture Base Resins: A Systematic Review. Applied Sciences. 2021;11(13):5990. doi:10.3390/app11135990 .
Related articles
Keep exploring related topics from Dental Country.

Fluoride Varnishes: Vanish, Profluorid, NUPRO White
5% sodium fluoride varnish in unit doses and a 10 ml tube, plus TCP, CPP-ACP, and CXP options.
Read article
Glass Ionomer Restoratives: Fuji II LC, EQUIA Forte
Fuji II LC, EQUIA Forte, packable Fuji IX, and Ketac Silver cermet: glass ionomer restoratives compared.
Read article
Obturation Systems: Carrier-Based, Cartridges and Ovens
Carrier, warm vertical, or downpack obturation, and how the Kerr and Dentsply Maillefer systems differ.
Read article
Orthodontic Elastomerics: Ligatures, Chain, Elastics
Patterson ligatures, chains, patient elastics, separators, and a color wheel: orthodontic elastomerics compared.
Read article
