Dental Country — all about dentistry
A resin-cement automix cartridge with a mixing tip, teal plunger, and a smooth blank barrel.
Last Updated: 11/18/2026

Resin Cements: Variolink, RelyX Unicem, Panavia SA

Compare 10 resin cements, including adhesive Variolink Esthetic and self-adhesive RelyX Unicem 2 and PANAVIA SA Cement Universal.

Dr. Sean Myran, DMD

Reviewed by Dr. Sean Myran, DMDDoctor of Dental Medicine, University of Pennsylvania

How we rank explains how these product lists are ordered.

How to Choose a Resin Cement

The resin cements on this list follow one of two protocols. Adhesive cements (Variolink Esthetic DC, NX3, RelyX Ultimate, Multilink Automix) need a bonding agent or primer on the tooth and a separate primer on the restoration. Self-adhesive cements (RelyX Unicem 2, Calibra Universal, PANAVIA SA Cement Universal, Maxcem Elite, SpeedCEM Plus) are designed to be used without that extra bonding step. Item 9 isn’t a cement at all. It’s the tooth primer that goes with Multilink Automix.

A dual-barrel automix cartridge alone beside a similar cartridge plus a small primer bottle.

Let the prep and the restoration material decide the protocol. A retentive zirconia crown can be seated with an MDP-containing self-adhesive cement. A thin glass-ceramic veneer, or any prep with little retention, calls for an adhesive system and a dry field. Ivoclar’s Variolink Esthetic instructions say not to use it if you can’t keep the field dry. The current SpeedCEM Plus instructions also require a dry field, don’t call for a separate dentin bonding agent, and limit the cement to preps with adequate retention.

A dual-barrel automix cartridge beside a smaller single-barrel syringe, both with blank barrels and teal plungers.

What actually changes the outcome

  • Adhesive or self-adhesive. Use an adhesive system when retention is poor, the restoration is glass-ceramic, or the instructions call for a bonding agent. Use a self-adhesive cement when the prep is retentive and you want fewer bottles.
  • Cure mode and opacity. Zirconia, metal and thick crowns block the light, so they need a dual-cure or strong self-cure cement. Light-cure-only esthetic cements are for thin, translucent restorations. The Variolink listed here is the dual-cure DC, not the light-cure LC.
  • Monomer and intaglio prep. The MDP-containing self-adhesive cements (PANAVIA SA Cement Universal, SpeedCEM Plus) are the ones marketed for zirconia and base metal without a separate primer. You still air-abrade zirconia, and glass-ceramic still needs whatever surface treatment that cement’s instructions specify.
  • Shade stability. Amine co-initiators are the usual reason a translucent cement turns gray over time. Variolink Esthetic is amine-free (it uses Ivocerin), and Kerr describes NX3’s initiator the same way. That matters far more under a thin e.max veneer than under a zirconia molar.
  • Cleanup window. Tack-cure or let the cement gel briefly, then remove the excess before it hardens under the contacts. Any cement is hard to clean up if you wait until it has fully set.
CementMakerBonding stepsCureBest useWatch-out
Variolink Esthetic DCIvoclarAdhesive (Adhese Universal + Monobond Plus)Dual-cureGlass-ceramic, lithium disilicate, composite; opaque restorations if the adhesive is dual-cured or light-cured firstRequires a dry field. Not a self-adhesive cement.
RelyX Unicem 23MSelf-adhesiveDual-cure automixRetentive crowns, inlays, onlays, postsNot for veneers. Some adhesive bridges still call for enamel etching.
NX3 dual-cureKerrAdhesive universal cementDual-cure automix (light-cure NX3 is a separate product)Indirect restorations where you want Kerr’s amine-free color stabilityNeeds an adhesive. Don’t use it like Maxcem.
RelyX Ultimate3MAdhesive, paired with Scotchbond UniversalDual-cureGlass-ceramic and other cases where you want a stronger bond than UnicemMore bonding steps. It isn’t interchangeable with Unicem.
Multilink AutomixIvoclarAdhesive with Multilink Primer A/B; Monobond Plus on the restorationSelf-cure, optional lightMetal, zirconia, ceramic, composite, postsThe primer is sold separately (item 9), so the syringe alone is an incomplete kit.
Calibra UniversalDentsply SironaSelf-adhesiveDual-cure automixCrowns and bridges without a separate bonding agentNot suitable for non-retentive veneers.
PANAVIA SA Cement UniversalKuraraySelf-adhesive; original MDP plus LCSi silane monomerDual-cure automix or handmixZirconia, metal and glass-ceramic without a separate primerStill air-abrade zirconia. Clearfil Universal Bond Quick is an optional step to improve the tooth bond, not a requirement.
Maxcem EliteKerrSelf-etch / self-adhesiveDual-cureOne-step cement for ceramic, metal, zirconia and CAD/CAM crownsFor a non-retentive prep, switch to NX3 or another adhesive cement.
Multilink Primer A/BIvoclarSelf-etch tooth primer, not a cementSelf-cure primerThe tooth side of Multilink AutomixWon’t lute a crown on its own.
SpeedCEM PlusIvoclarSelf-adhesive MDP cement; no primer on zirconia or base metalSelf-cure with a light-cure optionRetentive zirconia and metal, implant abutments, retentive lithium disilicate crowns and bridges with the intaglio primedRequires a dry field and adequate retention. Not for veneers or short, over-tapered preps.
Summarized from Ivoclar, 3M, Kerr, Dentsply Sirona and Kuraray instructions and product pages. Shade ranges and working times vary by market, so check the box you actually stock.

Related luting choices: glass-ionomer luting cements · conventional cements · temporary cements

Variolink® Esthetic Luting Cement Dual Curing (DC) Refill - Ivoclar

Ivoclar Variolink Esthetic DC is a dual-curing adhesive luting composite dispensed from an automix syringe, with a radiopacity of 300% aluminum. Ivoclar indicates it for permanent cementation of glass-ceramic, lithium disilicate and composite inlays, onlays, partial crowns, crowns and bridges. It can also be used for opaque oxide-ceramic or metal restorations when the adhesive is dual-curing or light-cured before seating, and for endodontic posts with a dual-curing adhesive.

Shade stability is the reason it leads an esthetic-cement list. Variolink Esthetic is amine-free: its Ivocerin initiator replaces the tertiary-amine co-initiators that discolor translucent cements over time. The same Effect shades are available in the light-cure LC and the dual-cure DC, including a White Opaque for masking discolored preps. Ivoclar also emphasizes easy excess removal and a consistency that flows well but stays put during seating.

Who it is for: Dentists cementing lithium disilicate and other glass-ceramics where the shade has to hold, and who can isolate well enough for a full adhesive protocol.

Tradeoff: It isn’t a one-bottle self-adhesive. You need the matching adhesive (Adhese Universal in Ivoclar’s system) and Monobond Plus on the intaglio, and the instructions say not to use it if you can’t keep the prep dry. The LC version is only for thin, translucent restorations. Thick or opaque work needs the DC, with the adhesive light-cured first when the cement will rely on self-cure.

Sources: Ivoclar Variolink Esthetic instructions.


2. RelyX™ Unicem 2 Automix — 3M

RelyX™ Unicem 2 Self-Adhesive Resin Cement Automix Syringe Refill Kit - 3M

3M Oral Care RelyX Unicem 2 is the self-adhesive cement of the two RelyX products here. 3M’s instructions describe a dual-curing self-adhesive resin cement that doesn’t need bonding or conditioning of the tooth, with about 43% inorganic filler by volume and a working time of 2 minutes from the start of mixing. It’s indicated for final cementation of all-ceramic, composite and metal inlays, onlays, crowns and bridges, and of posts and screws. Because it’s dual-cure, it still sets under zirconia or metal where the light is weak.

Simplicity is the whole appeal. Unicem 2 is the cement to use when the prep has good walls and you don’t want a multi-bottle adhesive sequence between try-in and cleanup. It’s the wrong choice for a veneer or a short, over-tapered prep, where 3M and Ivoclar both describe an adhesive cement instead (RelyX Ultimate on this list, or Variolink Esthetic).

Who it is for: Offices that want a single automix syringe for everyday retentive crowns without stocking a separate tooth adhesive for them.

Tradeoff: Self-adhesive doesn’t mean it bonds like a total-etch veneer cement. For Maryland-style and other low-retention bridges, 3M’s own Unicem literature still discusses enamel etching. The line is now sold under Solventum, so the box may carry either name. Check the current instructions before dropping a bonding agent your team is used to.

Sources: RelyX Unicem 2 Automix instructions; Solventum RelyX Unicem 2 product page.


3. NX3 Dual-Cure Automix — Kerr

NX3 Universal Adhesive Resin Cement, Automix Dual-Cure Syringe (5 g) Refill - Kerr Restoratives

Kerr NX3 is an adhesive resin cement, not a self-adhesive one. This listing is the dual-cure automix syringe. Kerr also sells a light-cure NX3 for thin, translucent veneers, so don’t assume the dual-cure refill pictured is the veneer paste. Kerr’s main argument for NX3 over older adhesive cements is its amine-free initiator system, which is aimed at color stability.

“Universal” here means it works with Kerr’s adhesive approach, whether total-etch, self-etch or selective-etch depending on the bonding agent you pair it with. It doesn’t mean you can skip bonding. Used that way, it covers the indirect restorations adhesive cements are meant for: glass-ceramic, composite and metal, including cases where you want to light-cure the margins and let the bulk self-cure.

Who it is for: Practices already using OptiBond and other Kerr adhesives that want a dual-cure esthetic cement and care about long-term shade under translucent ceramics.

Tradeoff: If you want a one-step cement, that’s Maxcem Elite on this list, and it behaves very differently. Gel-phase cleanup only works if someone is watching the timing. And under a thin veneer, the light-cure NX3 is usually the better choice for shade than the dual-cure paste.

Sources: Kerr NX3 product page.


4. RelyX™ Ultimate — 3M

RelyX™ Ultimate Adhesive Resin Cement Syringe Refill - 3M

3M Oral Care RelyX Ultimate is the adhesive counterpart to Unicem 2. 3M designed it to be used with Scotchbond Universal Adhesive, not as a self-adhesive paste. It’s dual-cure, so the same syringe can cement glass-ceramic restorations where you want a stronger bond and still set under ceramic that blocks some light.

The useful thing is having both protocols in one brand. Use Unicem 2 when the prep is retentive and speed matters. Use Ultimate when you’re willing to place Scotchbond Universal, plus whatever primer the ceramic needs, because the prep is short, the ceramic is glass-based, or you simply want 3M’s full adhesive protocol. Bonds tend to fail when the habits get mixed up, such as using Ultimate without the adhesive or adding an unrelated bonding agent under Unicem.

Who it is for: Dentists who already use Scotchbond Universal and want 3M’s adhesive resin cement rather than the self-adhesive Unicem.

Tradeoff: It has more steps than Unicem 2, by design. Unlike PANAVIA SA Cement Universal, it doesn’t claim to skip the primer on glass-ceramic, so follow the Scotchbond and ceramic-primer instructions for the material you’re cementing. If you stock both RelyX cements, label them clearly so they don’t get mixed up.

Sources: Solventum RelyX Ultimate page.


Multilink® Automix NG Refill - Ivoclar

Ivoclar Multilink Automix is a self-curing luting composite with an optional light cure, used with Multilink Primer A and B on the tooth. Ivoclar indicates it for permanent adhesive cementation of silicate and oxide ceramics, metal and metal-ceramic, and composite inlays, onlays, crowns, bridges and posts. In the current system, Monobond Plus is the restoration primer for zirconia, glass-ceramic and metal.

The tooth primer is what puts Multilink’s dentin bond in a different category from SpeedCEM Plus. SpeedCEM Plus’s current instructions don’t use that primer and limit the cement to preps with adequate retention. Multilink is the Ivoclar cement to choose when the prep needs that stronger bond and you’ll actually mix and apply Primer A and B.

Who it is for: Offices cementing a mix of zirconia, metal-ceramic and glass-ceramic that want one adhesive automix system and will keep the primer next to the syringe.

Tradeoff: The syringe refill listed here doesn’t include the primer. That’s item 9, sold separately, which is handy for reorders but easy to mistake for another cement. Self-cure is what you rely on under opaque zirconia; the light cure is optional and doesn’t replace the primer.

Sources: Ivoclar Multilink Automix page.


6. Calibra® Universal — Dentsply Sirona

Calibra® Universal Self-Adhesive Resin Cement – Dual Cure, Automix - DENTSPLY Caulk

Dentsply Sirona Calibra Universal, listed here in the automix syringe, is a self-adhesive dual-cure resin cement. For its cleared indications, you don’t need a separate bonding agent. Those are the usual indirect restorations a self-adhesive crown cement covers, meaning crowns, bridges, inlays, onlays and posts, rather than veneers that need a light-cure esthetic paste.

It competes directly with Unicem 2 and Maxcem Elite: fewer steps, and a dual-cure set under zirconia or metal. It doesn’t offer Variolink’s amine-free shade system or PANAVIA’s claim of skipping the primer on lithium disilicate. If your lab sends mostly retentive zirconia and PFM, Calibra Universal is a sensible everyday cement. If your schedule is mostly anterior glass-ceramic, look at the adhesive cements instead.

Who it is for: Practices that prefer Dentsply Sirona products and want a self-adhesive automix for retentive indirect work, not veneers.

Tradeoff: Cleanup is still time-sensitive, and a dual-cure cement will set in the contacts if you tack and floss too late. Don’t add a bonding agent “just in case” unless the Calibra instructions call for it. Mismatched adhesive chemistry can make a simple cement unpredictable.

Sources: Dentsply Sirona Calibra Universal page; Calibra Universal instructions.


7. PANAVIA™ SA Cement Universal — Kuraray

Panavia™ SA Cement Universal Automix Kits - Kuraray America Inc

Kuraray Noritake PANAVIA SA Cement Universal is a dual-cure, fluoride-releasing, radiopaque self-adhesive resin cement. Kuraray indicates it for ceramic (including porcelain, lithium disilicate and zirconia), composite resin and metal crowns, bridges, inlays, onlays, implant abutments, adhesion bridges, and posts and cores. It’s built on two monomers: the original MDP, which bonds to tooth structure, metal and metal oxides such as zirconia, and the LCSi silane monomer, which is why Kuraray says glass-ceramic and composite can be cemented without a separate primer. It comes in automix and handmix versions, and the automix shades include Universal (A2), White and Translucent.

Kuraray consistently highlights easy excess cleanup and room-temperature storage. That doesn’t mean you can skip surface prep, though. Kuraray’s own protocol has you air-abrade zirconia and composite intaglios and etch silica-based ceramics with hydrofluoric acid. The cement’s built-in silane then replaces the separate primer bottle. Clearfil Universal Bond Quick is an optional extra step if you want a stronger bond to the tooth.

Who it is for: Practices that cement zirconia one hour and lithium disilicate the next and want a single self-adhesive paste with no separate ceramic primer for either, as long as the intaglio is still properly prepared.

Tradeoff: “No primer” refers to the restoration primer, not to skipping cleaning or sandblasting the zirconia. Working time gets short once the paste warms up, so use the working-time chart in the current instructions rather than another cement’s numbers. Handmix gives you a longer mixing window but adds room for mixing error. It’s still a self-adhesive cement, and a non-retentive veneer needs a different procedure.

Sources: Kuraray PANAVIA SA Cement Universal instructions.


8. Maxcem Elite™ — Kerr

Maxcem Elite™ Self-Etch/Self-Adhesive Resin Cement, Individual Shade Refill Packs - Kerr Restoratives

Kerr Maxcem Elite is Kerr’s self-etch, self-adhesive resin cement, sold here as shade-specific automix refills. It’s a one-step cement for ceramic, composite, metal and zirconia indirect restorations when you don’t want NX3’s bonding-agent sequence. Because it’s dual-cure, it sets under opaque crowns.

Keep it clearly separate from NX3, even though both come from Kerr. Maxcem Elite is the fast cement, and NX3 is the adhesive esthetic cement. If someone grabs “the Kerr cement” without checking, a veneer can end up seated with the self-adhesive paste, or OptiBond can end up under Maxcem because the last crown used NX3.

Who it is for: Offices that want Kerr’s one-step automix for retentive crowns and CAD/CAM restorations, and that keep NX3 for cases that need an adhesive protocol.

Tradeoff: Self-adhesive cements don’t tolerate a contaminated or non-retentive prep, and Maxcem doesn’t gain NX3’s veneer indication. Shade refills add up quickly, so stock the two shades you actually use rather than the whole range.

Sources: Kerr Maxcem Elite page.


Multilink® Primer Adhesive - Ivoclar

This slot is Ivoclar Multilink Primer, the self-etching, self-curing tooth primer for Multilink Automix. Primer A and Primer B are mixed and applied to enamel and dentin. They aren’t a luting cement, they don’t go inside the crown, and they don’t replace Monobond Plus on zirconia, metal or glass-ceramic.

In Ivoclar’s system, the primer seals the dentin and forms the hybrid layer that SpeedCEM Plus is designed to do without. That’s why a Multilink syringe without these bottles is an incomplete adhesive system, and why a shelf label reading “Multilink” could mean either the cement (item 5) or this primer. The bond and radiopacity you associate with Multilink come from the cement and primer together, not the primer alone.

Who it is for: Practices that have standardized on Multilink Automix and need to reorder the primer.

Tradeoff: Never cement a restoration with the primer alone. Don’t use it under SpeedCEM Plus or another manufacturer’s self-adhesive cement unless those instructions say to, because it belongs to the Multilink system. And although it’s self-etching, it still needs a clean, dry prep to form the hybrid layer Ivoclar describes.

Sources: Ivoclar Multilink Automix page, including Primer A/B.


10. SpeedCEM® Plus — Ivoclar

SpeedCEM® Plus Resin Cement Refill Kits - Ivoclar

Ivoclar SpeedCEM Plus is a self-adhesive resin cement containing the phosphoric-acid monomer MDP. It’s primarily self-curing, with a light-cure option. Ivoclar indicates it for retentive zirconia crowns, bridges and posts; metal and metal-ceramic; lithium disilicate crowns and bridges on retentive preps; fiber-reinforced composite posts; and retentive crowns and bridges on implant abutments. No separate dentin bonding agent is needed. Zirconia and non-precious metal are sandblasted and shouldn’t be cleaned with phosphoric acid. Lithium disilicate still needs Monobond Etch & Prime, or hydrofluoric acid followed by Monobond Plus, and precious metal gets Monobond Plus.

The appeal is a short protocol: sandblasted zirconia or base metal without a separate primer, and a self-cure set under opaque ceramic. The current instructions also say not to use it if you can’t keep the field dry, and not to place it on an exposed pulp or on dentin close to the pulp. Working time is about 2 minutes at room temperature and about 1 minute in the mouth.

Who it is for: Practices seating a high volume of retentive zirconia and metal restorations, including retentive implant crowns, that want Ivoclar’s short self-adhesive protocol.

Tradeoff: Adequate retention is part of the indication, not a footnote. A short, over-tapered prep belongs with Multilink, and a lithium disilicate veneer, or any prep without adequate retention, is a Variolink Esthetic case. Lithium disilicate seated with SpeedCEM Plus still needs the primer step in its instructions. Sandblast zirconia and don’t “clean” it with phosphoric acid, which blocks the MDP bond the cement depends on.

Sources: Ivoclar SpeedCEM Plus instructions.

Frequently Asked Questions

Do I need a bonding agent with a self-adhesive resin cement?

Not for the indications the manufacturer designed it for. RelyX Unicem 2, Calibra Universal, Maxcem Elite, PANAVIA SA Cement Universal and SpeedCEM Plus are all made to lute without a separate tooth adhesive. An extra bonding agent only helps when that cement’s instructions call for one, such as Kuraray’s optional Clearfil Universal Bond Quick step. Otherwise it can contaminate the interface.

Which of these cements is appropriate for a zirconia crown?

For a retentive zirconia crown, SpeedCEM Plus and PANAVIA SA Cement Universal are the self-adhesive options here that bond to zirconia through MDP without a separate zirconia primer. RelyX Unicem 2 and Calibra Universal are also self-adhesive dual-cure crown cements. Multilink Automix and Variolink Esthetic DC can cement zirconia too, but they’re adhesive systems that need a primer on the tooth and the right ceramic primer, or a dual-cure adhesive. Either way, air-abrade the intaglio.

Because the original ranking listed it as a separate product. It’s the self-etch primer for Multilink Automix, not a cement, so keep it with the Multilink syringe and don’t reorder it when you’re actually out of cement.

Does an amine-free cement stay the shade I saw at try-in?

Amine-free initiators (Ivocerin in Variolink Esthetic, and Kerr’s initiator in NX3) are meant to prevent the gray shift that amines cause in translucent cements. They won’t fix an opaque White shade, a contaminated prep, or try-in paste left in the crown. Use that system’s try-in paste, clean it out thoroughly, then cement.

More on luting and core materials:

What changed: Nov 2026: added a comparison table, manufacturer sources, and price ranges. Rewrote the product notes in plain language and removed repeated reviewer notes.

Keep exploring related topics from Dental Country.