Top 10 Teeth Desensitizers.

How to Choose a Desensitizer

These ten rows are not one HEMA liquid in ten bottles. Danville MicroPrime, Patterson Desensitizer, and the Gluma refill are liquids aimed at open tubules before a restoration. Telio CS is a clear Ivoclar liquid with a 10-second working time. HurriSeal is the glutaraldehyde-free bottle used after etching. Hemaseal & CIDE is the 4% chlorhexidine bottle. Riva Star is silver diamine fluoride plus potassium iodide for adults over 21. Calm-it is a 6 ml one-step liquid whose manufacturer line is blank. Cervitec Plus is a chlorhexidine-and-thymol varnish. Super Seal is a calcium-oxalate tubule seal.

Several rows are placed before bonding or cementing. Restorative adhesives are a different shelf: dental adhesives. HurriSeal’s directions say after etching and before priming, which is the intraoral etchant step. When the next material is a crown cement, use the resin cement guide for the luting material itself. Dealer prices and star counts are omitted.

Buying criteria that change the bottle

• What closes the tubule — MicroPrime and Patterson say HEMA. Gluma’s block does not name HEMA or glutaraldehyde; it says a ready-to-use liquid with no mixing and no curing. Super Seal says a calcium-oxalate precipitate and smear-layer removal. Riva Star says silver iodide formed from silver diamine fluoride and potassium iodide. Cervitec Plus is a varnish of 1% chlorhexidine and 1% thymol. Hemaseal & CIDE says 4% chlorhexidine.
• When it goes on — HurriSeal: after etching, before priming or bonding, 1–3 coats. Telio CS: on cut dentin, 10 seconds, no light. Gluma: before priming and bonding. Super Seal: no rinsing and no pumice. The others are chairside liquids under restorations, with Calm-it described as one step.
• What it is not — Cervitec Plus is a protective varnish for margins, roots, and fissures. Riva Star’s block limits the indication to dentinal hypersensitivity in adults 21 and older. Neither row is a 10 ml HEMA bottle.
• Manufacturer strings that disagree — HurriSeal’s table cell says Parker Dental and the spec block says Beutlich Pharmaceuticals. Hemaseal’s table cell says Parkell and the spec block still has the placeholder “ADVANCED DENTAL TECHNOLOGIES (specify if different).” Calm-it’s manufacturer field is a placeholder. Those conflicts stay labeled. No third company name is added.

Product	What the row is	Chemistry the listing names	Size the listing prints	Watch-out
MicroPrime	HEMA desensitizer, two versions	HEMA; tubules and nerve response. MicroPrime G called Gluma-equivalent	10 ml	Danville. Total-etch systems, cements, and amalgam.
Gluma refill	Ready-to-use desensitizer liquid	Active ingredients are not named on this page	5 ml	Table says Heraeus Kulzer; spec says Kulzer. No mix, no cure.
Patterson Desensitizer	HEMA liquid	HEMA to help primers enter etched dentin	10 ml	Patterson private label. No mixing.
Telio CS	Clear liquid for cut dentin	Chemistry beyond “desensitizing solution” is not printed	Not printed	Ivoclar. 10-second working time. No light cure.
HurriSeal	Glutaraldehyde-free dentin liquid	Glutaraldehyde-free; wetting agent	12 ml	After etch, before bond. 6–9 months on cervical areas, or the life of the restoration. Maker string conflicts.
Hemaseal & CIDE	Chlorhexidine desensitizer	4% chlorhexidine	10 ml	“Up to 33%” bond-strength line is the listing’s claim. Maker string conflicts.
Riva Star	Two-step SDF then iodide	Silver diamine fluoride and potassium iodide	Not printed	SDI. Adults 21+. Listing says sound enamel and dentin do not stain.
Calm-it	One-step liquid	Chemistry is not named	6 ml	Manufacturer not named. “Seconds” is the listing’s onset line.
Cervitec Plus	Clear protective varnish	1% chlorhexidine and 1% thymol	Not printed	Ivoclar. Varnish for roots, margins, and fissures, not a HEMA bottle.
Super Seal	Oxalate tubule seal	Calcium oxalate; removes smear layer	Not printed	Phoenix Dental. No rinse. Enamel, dentin, and cementum.

1. MicroPrime Desensitizer — Danville

MicroPrime is a HEMA desensitizer in a 10 ml bottle from Danville Materials. The listing says it plugs tubules, changes nerve response, and helps bonding primers enter etched dentin. Two versions are named: MicroPrime B (original) and MicroPrime G, which the page calls equivalent to Gluma. Compatibility printed: total-etch bonding systems, cements, and amalgam. Uses named: cervical erosion, under temporary and final restorations, and amalgam.

Who it is for: A 10 ml HEMA liquid under total-etch work when you want Danville’s bottle, including the Gluma-equivalent G version the page describes.

Tradeoff: “Equivalent to Gluma” is this listing’s line about MicroPrime G. It does not make the 5 ml Gluma refill the same SKU. No application time is printed.

---

2. Gluma Desensitizer — 5 ml refill

The Gluma desensitizer refill is a 5 ml ready-to-use liquid. The product block says no mixing and no curing, for cervical and dentinal hypersensitivity, and as a pretreatment before priming and bonding. Materials named as compatible: composites, compomers, amalgam, and adhesives. The comparison table prints Heraeus Kulzer. The spec block prints Kulzer. Active ingredients are not named on this page.

Who it is for: A 5 ml Gluma refill when the step is “apply, no mix, no light” before priming.

Tradeoff: This page does not print HEMA, glutaraldehyde, or a duration. Those words are not added. The Heraeus Kulzer versus Kulzer strings are both on the page.

---

3. Patterson Desensitizer — 10 ml

Patterson Desensitizer is a 10 ml HEMA liquid from Patterson Dental. The listing says it helps seal tubules and helps bonding primers enter etched dentin, for abrasion, cervical erosion, and restorative preps. It says no mixing, and compatibility with most dentin resin bonding materials. Uses named: under composite and provisional restorations, and on etched dentin before bonding.

Who it is for: A Patterson-labeled 10 ml HEMA bottle for the same etch-then-bond moment as other HEMA liquids on this list.

Tradeoff: The page does not say this is MicroPrime or Gluma under a different label. It prints HEMA, 10 ml, and Patterson. It does not print a coat count or a months-of-relief figure.

---

4. Telio CS Desensitizer — Ivoclar

Ivoclar Telio CS is a clear liquid applied to cut dentin. The listing prints a total working time of 10 seconds and no light cure. Uses named: under temporaries, before cementation of indirect restorations, during direct restorative treatment, and on sensitive tooth necks. Bottle volume is not printed.

Who it is for: Cut dentin when a 10-second, no-light Ivoclar liquid is the step before a temporary or a cement.

Tradeoff: Chemistry is not named beyond “desensitizing solution,” so this guide does not call it HEMA or glutaraldehyde. Pack size is not on the page. The crown temporary itself is a different catalog from this liquid.

---

5. HurriSeal Dentin Desensitizer — 12 ml

HurriSeal is a 12 ml dentin desensitizer the listing calls glutaraldehyde-free and soft-tissue friendly. Directions printed: after etching, before priming or bonding, 1–3 coats, no mixing and no light. Duration printed: 6–9 months on cervical areas, or the life of the restoration. Uses named: cervical erosion, toothbrush abrasion, exposed roots, post-whitening sensitivity, and after scaling and root planing once tissues have healed. The comparison table names Parker Dental. The spec block names Beutlich Pharmaceuticals.

Who it is for: A 12 ml, glutaraldehyde-free liquid used after the etch and before the adhesive, when 1–3 coats match the sensitivity you are treating.

Tradeoff: Two manufacturer names are printed and neither is dropped. The 6–9 month cervical line is the listing’s duration, not a head-to-head trial against Gluma.

---

6. Hemaseal & CIDE — 10 ml

Hemaseal & CIDE is a 10 ml desensitizer whose active ingredient line says 4% chlorhexidine. The listing says it is compatible with all dentin adhesives, soft-tissue friendly, reduces microleakage, and increases bond strength by up to 33%. Uses named: under direct and indirect restorations, postoperative sensitivity, and bond durability. The comparison table names Parkell. The spec block still reads “ADVANCED DENTAL TECHNOLOGIES (specify if different),” which is an unfinished placeholder.

Who it is for: A 4% chlorhexidine desensitizer under an adhesive when that bond-strength claim is one you will treat as the manufacturer’s line, not as a new measurement.

Tradeoff: The 33% figure is the listing’s claim. The placeholder manufacturer string is not a company. Parkell is only the table’s manufacturer cell.

---

7. Riva Star — SDI

Riva Star is a two-step desensitizer: silver diamine fluoride, then potassium iodide. The listing says the steps form silver iodide, treat dentinal hypersensitivity, and do not stain sound enamel or dentin. The age line says adults 21 and older. Uses named: hypersensitivity, before or after restorative work, and exposed roots. Pack size is not printed. Manufacturer: SDI Limited.

Who it is for: In-office hypersensitivity treatment in adults over 21 when the protocol you want is SDF followed by iodide.

Tradeoff: This is not a HEMA bottle and not a varnish. The no-stain line applies, in the listing’s words, to sound enamel and dentin. Volume is not on the page, so none is added.

---

8. Calm-it Desensitizer — 6 ml refill

Calm-it is a 6 ml liquid the listing describes as a one-step chairside desensitizer that penetrates tubules and stops sensitivity in seconds. Compatibility printed: adhesives, cements, composites, amalgams, core buildups, and temporaries. Uses named: under direct and indirect restorations, crown and bridge visits, and exposed dentin. The manufacturer field on the spec block is a placeholder, so no company is added.

Who it is for: A 6 ml one-step liquid under restorative materials when the catalog row you are holding is Calm-it and the brand name is not required to choose it.

Tradeoff: Chemistry is not named. “Seconds” is the listing’s onset line. A manufacturer is not invented to fill the blank.

---

9. Cervitec Plus — Ivoclar

Ivoclar Cervitec Plus is a clear, colorless varnish with 1% chlorhexidine and 1% thymol. The listing describes selective application on exposed cervical margins, around crowns and bridges, on proximal areas, and in fissures and grooves, and on open dentin tubules. It is described as homogenous and suited to anterior teeth because it stays transparent. Volume is not printed.

Who it is for: A clear chlorhexidine-thymol varnish when the job is a painted barrier on a margin, a root, or a fissure.

Tradeoff: A varnish is a different handling step from the HEMA liquids above. The page does not print a reapplication interval or a bottle size.

---

10. Super Seal — Phoenix Dental

Super Seal, from Phoenix Dental, is a one-step desensitizer the listing says removes the smear layer and forms calcium oxalate within seconds. It says no rinsing and no pumice, and that the oxalate liner is acid-resistant and chemically binds to dentin. Surfaces named: enamel, dentin, and cementum. Uses named: pre-restorative desensitization and exposed dentin or cementum on vital teeth. Volume is not printed.

Who it is for: An oxalate seal when you want smear-layer removal and tubule closure in the same step, without a rinse.

Tradeoff: This is not HEMA and not chlorhexidine. “Within seconds” and “acid-resistant” are the listing’s lines. Pack size is not on the page.