Comparison Table for Dental Cement Products
| Item Name | Brand/Manufacturer | Application/Use | Key Features |
|---|---|---|---|
| Ivoclean Universal Cleaning Paste | Ivoclar Vivadent | Cleaning bonding surfaces of prosthetic restorations | Effective cleaning, creates optimum prerequisites for adhesion |
| GC Fuji Coat™ LC | GC America | Coating agent for glass ionomer materials | Low viscosity, biocompatible, eliminates surface irregularities |
| Ketac™ Conditioner | 3M ESPE | Smear layer removal for increased bond of glass ionomer cement | Polyacrylic acid solution, improves bond strength |
| Panavia™ 21 Oxyguard™ II | Kuraray | Oxygen-blocking gel for anaerobic setting | Viscous gel, contains polymerization accelerator |
| Cavit™ Tube Key | 3M ESPE | Dispensing Cavit Temporary Filling Material | Effective dispensing |
| Glaze™ Acrylic-Resin Sealant | Dentsply Sirona | Fast-setting acrylic resin for polishing appliances | Fast-setting, crystal clear, self-curing, high-gloss finish |
| Ortho Gel Conditioner | GC America | Conditioner for enhanced bond strength of glass ionomer materials | Polyacrylic acid gel solution |
| Ultra-Bond® Try-In Paste | DenMat | Restorative and cement for crowns and veneers | Helps prevent marginal staining and pop-offs, ideal for crowns and veneers |
| The Original Porcelain Condensing Liquid | A.D.S. Inc | Denser and tougher porcelain mix | Unique binder properties, superior handling and carving properties |
| Panavia™ F 2.0 Oxyguard II | Kuraray | Oxygen-blocking agent for Panavia F 2.0 paste | Allows polymerization without light-curing |
Top 10 Dental Cements, Liners & Dental Adhesive
1. Ivoclean Universal Cleaning Paste
Ivoclean is a universal cleaning paste designed to effectively clean the bonding surfaces of prosthetic restorations after intraoral try-in and thus creates optimum prerequisites for the adhesive luting procedure.
Top 10 Temporary Cements in Dentistry
2. GC Fuji Coat™ LC
GC Fuji COAT™ LC is formulated from a unique blend of special monomers developed to penetrate and seal glass ionomer materials. This product seals the margin and surface defects, leaving an extra smooth surface on final restorations. GC Fuji COAT™ LC protects against moisture contamination and serves as a protective shield for glass ionomer materials.
- Low viscosity – easy to apply/flows evenly
- Biocompatible and safe
- Eliminates surface irregularities
3. Ketac™ Conditioner
Ketac™ Conditioner is a polyacrylic acid solution for the removal of the smear layer after tooth preparation. Dentin conditioning with Ketac™ Conditioner significantly increases the bond of glass ionomer cement fillings.
4. Panavia™ 21 Oxyguard™ II
Oxyguard™ II is a viscous gel used to block the oxygen from anaerobic setting Panavia™ 21 paste.
- Apply to the margin of the restoration.
- Contains a polymerization accelerator for a more effective setting
- Dental material for curing promotion and surface protection
5. Cavit™ Tube Key
Cavit™ Tube Key effectively dispenses Cavit Temporary Filling Material packaged in tubes.
6. Glaze™ Acrylic-Resin Sealant
Glaze™ is a fast-setting, crystal clear, self-curing acrylic resin that bonds to other resin substrates and dries to a clear, hard surface with a high-gloss finish.
- Can be brushed onto a clean composite or acrylic material in or out of the mouth to achieve a polished surface that enhances the appliance and reduces the need for additional polishing
- Recommended for use on provisional, reline and orthodontic appliances; Glaze™ fills microscopic voids and reduces bacterial growth and odor
- Sets in 10-20 seconds
7. Ortho Gel Conditioner
GC Ortho Gel Conditioner is a polyacrylic acid gel solution (approx. 20%) designed to mildly etch and condition enamel, thus enhancing the bond strength of glass ionomer materials to tooth surfaces.
8. Ultra-Bond® Try-In Paste
Ultra-Bond® Plus is a multipurpose, dual-cured, ADA Type II restorative and cement. Ultra-Bond was custom designed to match Cerinate porcelain’s and tooth structure’s physical properties for long-lasting restorations.
- Helps prevent marginal staining and pop-offs
- Ideal cementing/luting medium for crowns and veneers
- Protects against wash-out
- Eliminates cracking or crazing of porcelain
- Allows for placing multiple restorations at one time with just one mix
- Easily distinguished from tooth structure in radiographs
9. The Original Porcelain Condensing Liquid
The Original Porcelain Condensing Liquid is used instead of water for a denser, tougher mix with all porcelains.
- Unique binder properties cause porcelain particles to pack tightly together
- Forms a plastic mix with superior handling and carving properties
- Opaque in one coat
- Build up with fewer, heavier applications
- Porcelain does not slump and requires almost no condensing
- Case packs drier, denser, and fires faster
- Less particle segregation means the optimum performance of your porcelain and truer shades
10. Panavia™ F 2.0 Oxyguard II
Oxyguard II is an oxygen-blocking agent to allow the Panavia F 2.0 paste to polymerize when not light-cured.
