Top 10 Autoclave Replacement Parts

Comparison Table for Autoclave Replacement Parts

Autoclave replacement parts like nozzles, door gaskets, rubber replacement tips and cassette seals are available to ensure that the effectiveness off the sterilizer is not compromised.

Top 10 Autoclave Cleaners and Sterilants

1. Door Gasket M9 – Midmark

Product Description

The Door Gasket M9 from Midmark is a high-quality replacement seal designed to ensure an airtight closure for M9 autoclaves. This gasket plays a crucial role in maintaining proper pressure, preventing steam leakage, and ensuring effective sterilization cycles.

Product Overview

Engineered for reliability and performance, this gasket helps maintain optimal operating conditions within the chamber. It is essential for preserving autoclave integrity, maximizing efficiency, and ensuring the consistent sterilization of dental instruments.

Key Features

• Creates an airtight seal in M9 autoclave chambers
• Prevents steam and pressure leakage
• Promotes effective and consistent sterilization
• Designed specifically for Midmark M9 units
• Easy to install as a direct replacement part

Common Applications

• Replacement part for routine autoclave maintenance
• Maintaining optimal performance of sterilization equipment
• Preventing incomplete sterilization due to pressure loss

Technical Specifications

• Product Type: Gasket
• Compatible Autoclave: Midmark M9
• Manufacturer: MIDMARK CORPORATION
• Package Quantity: 1 per package

Customer Ratings

4.8/5 from dental technicians and sterilization specialists

Customer Feedback

• Fits perfectly and restores the seal on our M9 autoclave.
• Simple installation and a must-have for proper sterilization

Top 10 Autoclave Wrap for Dental Offices

2. Door Gasket, Models 2340 and 2340E

Product Description

This door gasket is a direct replacement for Tuttnauer 2340 series autoclaves, ensuring a secure chamber seal to prevent steam leakage and maintain effective sterilization performance. Routine replacement of the gasket helps extend the life of the unit and ensures consistent sanitation of dental instruments.

Product Overview

Designed for easy installation, this gasket fits multiple Tuttnauer 2340 models including electric and manual variants. Regular replacement—typically every 12 months—is recommended to prevent wear-related failure and maintain optimal operating pressure.

Key Features

• Compatible with a wide range of Tuttnauer 2340 series models
• Provides a tight, steam-resistant seal
• Easy to install and replace as part of routine maintenance
• Promotes efficient sterilization and autoclave performance
• Recommended replacement interval: every 12 months or as needed

Common Applications

• Preventing steam leakage in dental sterilizers
• Maintaining pressure integrity in autoclave chambers
• Routine upkeep of sterilization equipment

Technical Specifications

• Product Type: Gasket
• Compatible Autoclaves: 2340, 2340E, 2340EA, 2340EK, 2340EKA, 2340MD EZ9
• Manufacturer: Tuttnauer USA Co Ltd
• Package Quantity: 1 per package

Customer Ratings

4.7/5 from dental office and equipment maintenance professionals

Customer Feedback

• Perfect fit and a quick fix for steam leakage issues.
• Simple to install—replacing this gasket once a year keeps our autoclave running reliably.

3. Door Gasket, M7 Kit

Product Description

The Door Gasket M7 Kit from Midmark is a replacement gasket designed to maintain an airtight seal in M7 autoclaves. It ensures optimal pressure containment and steam retention, which are essential for effective sterilization of dental instruments.

Product Overview

This gasket is a critical component in preserving autoclave efficiency. By preventing steam leakage, it helps maintain proper internal conditions for thorough sanitation. Easy to install, it is recommended for regular replacement to ensure uninterrupted autoclave function.

Key Features

• Creates a tight, steam-resistant seal in Midmark M7 autoclaves
• Prevents leakage and promotes efficient sterilization
• Maintains chamber pressure for reliable performance
• Designed for simple replacement during routine maintenance
• Manufactured by Midmark for guaranteed compatibility

Common Applications

• Routine replacement in M7 sterilizers
• Preventing pressure and steam loss in dental autoclaves
• Ensuring effective instrument sanitation

Technical Specifications

• Product Type: Gasket
• Compatible Autoclave: Midmark M7
• Manufacturer: MIDMARK CORPORATION
• Package Quantity: 1 per package

Customer Ratings

4.8/5 from dental equipment technicians and office managers

Customer Feedback

• A must-have part to keep our M7 working efficiently.
• Easy to swap out—restores the seal and sterilization quality instantly.
  — Practice Support Team

4. Door and Dam Gasket for M11 UltraClave® Automatic Sterilizer

Product Description

The Door and Dam Gasket Kit for the M11 UltraClave® Automatic Sterilizer includes all necessary replacement seals to maintain optimal chamber integrity. Designed to restore sealing performance, this kit helps ensure safe and effective sterilization in busy dental practices.

Product Overview

Compatible with both M11 and M11D models, the kit includes a door gasket, dam gasket, and gasket ring. These components work together to prevent steam leakage, preserve pressure, and support the sterilizer’s high-performance standards. Recommended as part of routine autoclave maintenance.

Key Features

• Complete gasket replacement kit for M11 UltraClave® sterilizers
• Ensures tight chamber seal to prevent steam leakage
• Promotes efficient sterilization by maintaining internal pressure
• Compatible with M11 and M11D models
• Easy to install as part of standard maintenance

Common Applications

• Gasket replacement for M11 and M11D sterilizers
• Preventing steam and pressure loss
• Supporting consistent and reliable autoclave performance

Technical Specifications

• Product Type: Gasket Kit
• Compatible Autoclaves: M11, M11D
• Contains: 1 door gasket, 1 dam gasket, 1 gasket ring
• Manufacturer: MIDMARK CORPORATION
• Package Quantity: 1 per package

Customer Ratings

4.9/5 from dental equipment service teams and office staff

Customer Feedback

• Everything you need in one kit—easy to install and reliable.
• Essential for keeping our M11 running without downtime.
  — Facility Maintenance Coordinator

5. VistaCool™ Adjustable Tank Stands – Single-Autoclave System

Product Description

The VistaCool™ Adjustable Tank Stand is an installation accessory designed to support proper elevation of the VistaCool™ Direct-to-Drain System for autoclave wastewater. It allows for height customization to ensure efficient gravity flow and system performance.

Product Overview

Ideal for tight or uneven cabinet spaces, this stand helps align the VistaCool™ tank to the optimal height relative to your sterilizer’s drainage output. Adjustable from 1/2″ to 5″ in 1/2″ increments, it offers flexibility during setup and enhances system functionality.

Key Features

• Adjustable tank height from 1/2″ to 5″ in 1/2″ increments
• Ensures proper VistaCool™ installation and drainage alignment
• Sturdy and reliable support for single-autoclave configurations
• Compatible with VistaCool™ Direct-to-Drain wastewater systems
• Includes adjustment bars for flexible setup

Common Applications

• Elevating VistaCool™ tanks during initial installation
• Supporting direct-to-drain autoclave wastewater systems
• Ensuring correct drainage height for optimal system performance

Technical Specifications

• Product Type: Adjustable Tank Stand
• Compatible System: VistaCool™ Direct-to-Drain System for Autoclave Wastewater
• Compatible Sterilization Type: Autoclavable setups
• Contains: 1 stand and 2 height adjustment bars
• Height Range: 1/2″ to 5″ (adjustable in 1/2″ increments)
• Manufacturer: CROSSTEX INTL

Customer Ratings

4.8/5 from dental equipment installers and office managers

Customer Feedback

• A simple but smart solution for cabinet installations.
• Adjustability makes it easy to match the drainage height perfectly.
  

6. VistaCool™ Adjustable Tank Stands – Double-Autoclave System

Product Description

The VistaCool™ Adjustable Tank Stand for Double-Autoclave Systems is a height-adjustable support accessory designed to optimize the installation of the VistaCool™ Direct-to-Drain wastewater system. It ensures proper elevation for effective drainage from two autoclaves.

Product Overview

Built to support larger sterilization setups, this stand allows installers to raise the VistaCool™ tank between 1/2″ and 5″ in 1/2″ increments, ensuring the correct height alignment for efficient gravity flow. It is ideal for practices using a dual-autoclave configuration.

Key Features

• Adjustable height from 1/2″ to 5″ in 1/2″ increments
• Specifically designed for double-autoclave system installations
• Enhances drainage alignment and VistaCool™ system performance
• Compatible with VistaCool™ Direct-to-Drain wastewater setups
• Includes stand and height adjustment bars

Common Applications

• Elevating VistaCool™ tanks in dual-autoclave installations
• Ensuring proper drainage height and system efficiency
• Flexible setup in varying cabinet environments

Technical Specifications

• Product Type: Adjustable Tank Stand
• Compatible System: VistaCool™ Direct-to-Drain System for Autoclave Wastewater
• Compatible Sterilization Type: Autoclavable setups
• Contains: 1 stand and 2 height adjustment bars
• Height Range: 1/2″ to 5″ (adjustable in 1/2″ increments)
• Manufacturer: CROSSTEX INTL

Customer Ratings

4.8/5 from dental office installers and facility managers

Customer Feedback

• Perfect for dual-autoclave configurations—makes installation seamless.
• Reliable support with easy height adjustments.
  

7. M11 Gasket Dam Door

Product Description

The M11 Gasket Dam Door is a replacement gasket specifically designed for use with Midmark M11 and M11D UltraClave Automatic Sterilizers. This essential component ensures a reliable seal within the autoclave door assembly, maintaining effective pressure and steam retention.

Product Overview

Manufactured by Midmark Corporation, this gasket helps preserve the autoclave’s internal environment to support consistent sterilization cycles. It should be replaced periodically to prevent leaks and maintain the integrity of your M11 unit’s performance.

Key Features

• Designed for Midmark M11 and M11D UltraClave sterilizers
• Ensures tight sealing of the door dam
• Supports consistent pressure and steam retention
• Durable and reliable for long-term use
• Easy to install during standard maintenance procedures

Common Applications

• Replacing worn or damaged door dam gaskets
• Maintaining pressure integrity in M11 autoclave units
• Preventing steam leakage and cycle failure

Technical Specifications

• Product Type: Gasket
• Compatible Autoclaves: M11, M11D
• Manufacturer: MIDMARK CORPORATION
• Package Quantity: 1 per package

Customer Ratings

4.8/5 from sterilization techs and dental office staff

Customer Feedback

• Quick and easy replacement—restores full sealing instantly.
• Keeps our M11 running smoothly and reliably.

8. M9 Gasket Dam Only

Product Description

The M9 Gasket Dam is a replacement part located on the door of the Midmark M9 self-contained steam sterilizer. It plays a critical role in maintaining a secure seal, supporting consistent sterilization cycles by preventing steam and pressure loss.

Product Overview

Designed specifically for the M9 model, this dam gasket ensures the proper function of the autoclave’s sealing system. It is an essential maintenance component that should be replaced as needed to sustain peak sterilizer performance and safety.

Key Features

• Replacement dam gasket for M9 sterilizer doors
• Maintains pressure and steam seal integrity
• Supports effective and reliable sterilization cycles
• OEM part for precise fit and compatibility
• Easy to install during routine maintenance

Common Applications

• Replacing worn or damaged door dam gaskets
• Maintaining consistent chamber pressure and steam retention
• Ensuring optimal performance of M9 autoclaves

Technical Specifications

• Product Type: Gasket
• Compatible Autoclave: Midmark M9
• Old Manufacturer #: 053-0508-00
• Manufacturer: MIDMARK CORPORATION
• Package Quantity: 1 per package

Customer Ratings

4.7/5 from dental office managers and sterilizer technicians

Customer Feedback

• A perfect fit—restores the seal and stops leaks immediately.
• Essential part for keeping our M9 running efficiently.

9. Door Gasket, Model 2540

Product Description

The Door Gasket for Model 2540 is a replacement seal designed to maintain a secure, airtight closure in Tuttnauer 2540 series autoclaves. It ensures proper pressure retention and steam containment to support effective sterilization of dental instruments.

Product Overview

Compatible with a wide range of 2540 models, this gasket is easy to install and is recommended for replacement every 12 months or as needed. Regular maintenance helps prevent steam leakage and ensures the sterilizer operates at peak performance.

Key Features

• Creates a secure seal in Tuttnauer 2540 series sterilizers
• Supports effective and reliable sterilization cycles
• Easy to replace as part of standard maintenance
• Compatible with multiple model variants for convenience
• Designed for long-lasting performance under high-temperature use

Common Applications

• Replacing worn gaskets in Tuttnauer autoclaves
• Preventing pressure and steam leakage
• Maintaining sterilization efficiency in dental practices

Technical Specifications

• Product Type: Gasket
• Compatible Autoclaves: 2540, 2540E, 2540EA, 2540EK, 2540EKA, 2540MD EZ9
• Manufacturer: Tuttnauer USA Co Ltd
• Package Quantity: 1 per package

Customer Ratings

4.7/5 from sterilization technicians and dental office staff

Customer Feedback

• Great fit and easy to install—restores our autoclave’s seal perfectly.
• A critical maintenance item we keep in stock at all times

10. Door Gasket, M11 Steam Autoclave

Product Description

The Door Gasket for the M11 Steam Autoclave is a vital replacement component that helps maintain an airtight seal in Midmark M11 sterilizers. It supports consistent pressure and steam containment during each sterilization cycle, ensuring safe and effective instrument sanitation.

Product Overview

Specifically designed for M11 models, this gasket prevents leakage and maintains internal chamber integrity. Recommended for periodic replacement, it contributes to the overall reliability and performance of the sterilizer in dental and medical settings.

Key Features

• Provides a secure, steam-tight seal in M11 autoclaves
• Helps maintain optimal pressure and heat during cycles
• Prevents steam leakage for consistent sterilization performance
• Designed for easy installation and replacement
• OEM part ensures precise fit and long-term durability

Common Applications

• Replacing worn or damaged door gaskets in M11 sterilizers
• Maintaining chamber pressure and sterilization integrity
• Supporting efficient dental and medical equipment sanitation

Technical Specifications

• Product Type: Gasket
• Compatible Autoclave: Midmark M11
• Compatible Sterilization Type: Steam Heat
• Manufacturer: MIDMARK CORPORATION
• Package Quantity: 1 per package

Customer Ratings

4.8/5 from dental technicians and equipment service providers

Customer Feedback

• Essential part for keeping our M11 sealed and functioning properly.
• Reliable, easy to install, and fits perfectly