Top 10 Dental Bonded Investment Materials

-- Dental Country Editors

Formula-1-Universal-Investment-Whip-Mix-Corporation
TABLE OF CONTENT

Dental investment materials are used to encase the wax designed for the lost wax casting technique. These materials are usually available as a powder that is mixed with water and then used to encase the wax design.

Comparison Table 1: Top 5 Dental Investment Materials – Digits and Numbers

Item NameMixing RatioWorking TimeSetting ExpansionThermal ExpansionPSI
Special Liquid Concentrate, Plus22/1006-8 minutes1.6%0.65%1350
Formula 1 Universal Investment22/1006-8 minutes1.6%0.65%1350

Comparison Table 2: Top 5 Dental Investment Materials – Important Features and Other Things

Item NameSuitable forFeatures
Special Liquid Concentrate, PlusCrown and bridge alloys, pressable ceramicsWide expansion range, fluid consistency, no benchset/burnout time constraints
Fujivest® II PowderAll crown and bridge dental alloysRapid fire, carbon-free, ultra smooth, precision castings
Fujivest® II LiquidAll crown and bridge dental alloysRapid fire, carbon-free, ultra smooth, precision castings
Cera-Fina InvestmentAll classes of casting alloysExtremely fine texture, absence of carbon, increased liquid to powder ratio, bubble-free castings
Formula 1 Universal InvestmentCrown and bridge alloys, pressable ceramicsWide expansion range, fluid consistency, advanced hybrid formula, 15-minute benchset reduces processing time

Top 10 Denture Base Material


1. Special Liquid Concentrate, Plus – Whip-Mix Corporation

Special liquid concentrate, plus - whip-mix corporation

Learn More

The Special Liquid Concentrate is one investment for both crown and bridge alloys and pressable ceramics.

  • Wide expansion range
  • Fluid consistency promotes ease of investing and smooth surface
  • Rapid and standard burnout capabilities require no change in laboratory routines
  • More control and flexibility for the technician due to no benchset/burnout time constraints
  • Mixing ratio: 22/100
  • Working time: 6-8 minutes
  • Setting expansion: 1.6%
  • Thermal expansion: 0.65%
  • 1,350 psi
  • Keep from freezing

Top 10 Denture Repair Material in Dentistry


2. Fujivest® II Powder – GC America Inc

Fujivest® ii powder - gc america inc

Learn More

Fujivest® II Powder is a rapid fire, carbon-free phosphate bonded investment that produces ultra smooth, precision castings quickly and easily.

  • Suitable for all crown and bridge dental alloys
  • Set time after investing is 20 minutes
  • No need for progressive heat-up
  • Investment can be fired immediately after bench set-up time

3. Fujivest® II Liquid – 900 ml – GC America Inc

Fujivest® ii liquid – 900 ml - gc america inc

Learn More

Fujivest® II Liquid is a rapid fire, carbon-free phosphate bonded investment that produces ultra smooth, precision castings quickly and easily.

  • Suitable for all crown and bridge dental alloys
  • Set time after investing is 20 minutes
  • No need for progressive heat-up
  • Investment can be fired immediately after bench set up time
  • Do not freeze liquid, once crystalizes, it can no longer be used

4. Cera-Fina Investment Special Liquid Concentrate

Cera-fina investment special liquid concentrate - whip-mix corporation

Learn More

CERA-FINA is a carbon-free phosphate investment developed for professionals who demand a more finely grained investment. It is designed for use with all classes of casting alloys: precious, semiprecious and non-precious.

  • Extremely fine texture results in accurate castings with very smooth surfaces
  • Extended working time, as much as 10 minutes, allows the investing of multiple flasks
  • Absence of carbon assures compatibility with all casting alloys, especially Palladium and non-precious
  • Increased liquid to powder ratio yields a creamier mix and allows better flow, resulting in bubble-free castings

5. Formula 1 Universal Investment – Whip-Mix Corporation

Formula 1 universal investment - whip-mix corporation

Learn More

  • One investment for both crown and bridge alloys and pressable ceramics
  • Wide expansion range
  • Fluid consistency promotes ease of investing and smooth surfaces
  • Advanced hybrid formula strengthens molds and devests easily
  • Rapid and standard burnout capabilities require no change in laboratory routines
  • Only a 15-minute benchset reduces processing time and 30-minute burnout
  • Mixing ratio: 22/100
  • Working time: 6-8 minutes
  • Setting expansion: 1.6%
  • Thermal expansion: 0.65%
  • 1350 psi

6. Beauty-Cast Preweighed Packets – Whip-Mix Corporation

Beauty-cast preweighed packets - whip-mix corporation

Learn More

Beauty-Cast is gypsum bonded investments for low-fusing crown and bridge alloys.

  • The proven standard for the Hygroscopic Expansion Technique
  • Control setting expansion by varying the number of ring liners or altering water/powder ratio

7. FastFire Liquid – Whip-Mix Corporation

Fastfire liquid - whip-mix corporation

Learn More

FastFire 15 is a fine grain phosphate investment which requires only a 15 minute benchset before placing molds into a hot oven for rapid burnout. It produces accurate, smooth castings using either the ringless or metal ring technique. Optimum fit is achieved for all crown and bridge alloys through dilution of the freeze stable.

  • 15 minute benchset
  • 30 minute or overnight burnout
  • Mixing ratio: 27/100
  • Working time: 7-9 minutes
  • Setting expansion: 1.0%
  • Thermal expansion: 1.0%
  • 500 psi

8. Hi-Heat Soldering Investment Powder – Whip-Mix Corporation

Hi-heat soldering investment powder - whip-mix corporation

Learn More

Hi-Heat Soldering Investment Powder is a gypsum-bound investment that is ideal for soldering that requires the use of an oxygen-gas torch.

  • For high-fusing precious and base metals
  • Excellent with high fusing ceramic alloys for pre- and post-soldering technique
  • May be used for soldering precision attachments
  • Smooth consistency and flows freely
  • Trims smoothly
  • Withstands rapid drying out
  • Mixing ratio: 24/100
  • Working time: 2-3 minutes
  • Setting expansion: 0.20%
  • Thermal expansion: 0.60%
  • 1200 psi

9. Cristobalite, 144/ 50 g Preweighed Packets

Cristobalite, 144/ 50 g preweighed packets

Learn More

Cristobalite gives high thermal expansion, even at comparatively low temperatures. It is possible to use the same creamy mix by simple standard vacuum or painting techniques for all types of inlays.

  • Mixing ratio: 30/100
  • Working time: 3 minutes
  • Setting expansion: 0.50%
  • Thermal expansion: 1.25%
  • 700 psi
  • Ready for burnout: 30 minutes

10. Elasto-Vest, 20 oz Kit

Elasto-vest, 20 oz kit

Learn More

Elasto-Vest coats, protects and safeguards during the devesting process.

  • For use on acrylic, porcelain and composite teeth
  • Helps in the “break-out” of your acrylic denture work

Contains: 1 (20 oz) bottle and activator
Old Manufacturer #: M48311
Package Quantity: 1/Pkg
Size: 20 oz

Related Topics

Picture of Dental Country Editors

Dental Country Editors

The Dental Country research and editing team reviews all the public and specialty data available for products and services in dentistry as well as consumers' feedback and reviews to provide a fair source of information to both professional and public consumers in dentistry. We appreciate feedback, corrections, suggestions, or additional information available regarding all reviews and articles.