View Top 10 Ceramic Miscellaneous Supplies in Dentistry
This Exclusive List Can Help You Make The Right Decision! Learn More! View The Dental Country ™ Top 10 Ceramic Miscellaneous Supplies in Dentistry. Dentists & Doctors of All Types Will Benefit From These Articles!
Table 1: Comparison of Digits and Numbers in Ceramic Miscellaneous
| Item | Package Quantity | Hydrofluoric Acid | Acid Concentration | Bonding Enhancement |
|---|---|---|---|---|
| IPS Etching Gel | 1/Pkg | No | – | Yes |
| Porcelain Etch | 4/Pkg | Yes | 9.5% | Yes |
| Etch-Ease | 3/Pkg | No | – | No |
| Etch-It Kit | 1/Pkg | No | 5% | Yes |
| Programat Tray | 1/Pkg | No | – | No |
| Ceramic Primer | 1/Pkg | No | – | Yes |
| IPS Die Material | 8g Refills | No | – | No |
| Gradia Gum | Starter Package | No | – | Yes |
| Etch-It Kit | 1/Pkg | Yes | – | Yes |
| Micro-Red | – | No | – | No |
Table 2: Comparison of Important Features in Ceramic Miscellaneous
| Item | Main Use | Special Features | Quantity/Size |
|---|---|---|---|
| IPS Etching Gel | Create bonding surfaces on all-ceramic restorations | – | 1/Pkg |
| Porcelain Etch | Use prior to cementation and repairs | Rinses clean away, use with silane, Spira-Flo tips | 4/Pkg |
| Etch-Ease | Hold porcelain restorations during etching | Autoclavable, reusable | 3/Pkg |
| Etch-It Kit | Balanced etching formula for porcelain restorations | Will not over-etch, dip-it neutralizer | 1/Pkg |
| Programat Tray | Single layer sintering tray | – | 1/Pkg |
| Ceramic Primer | Treat adhered surface of ceramic and composite | – | 3 ml |
| IPS Die Material | Simulate shade of prepared tooth | Light-curing, simulate different tooth shades | 8g Refills |
| Gradia Gum | Reproduce gingival tissue for crown restorations | Micro-filled, shades based on natural tissue | Starter Package |
| Etch-It Kit | Etching solution for porcelain crowns and veneers | Dip-it neutralizer, complete etching system | 1/Pkg |
| Micro-Red | Reveal high spots in dental restorations | Quick dry, ultra-thin coat, no bleeding | – |
Top 10 Pressable Ceramics in Dentistry
1. IPS Ceramic Etching Gel
The IPS Ceramic Etching Gel is used for the creation of retentive bonding surfaces on all-ceramic restorations to prepare them for incorporation. It enhances the bonding effect between the luting composite and the ceramic bonding surface.
Package Quantity: 1/Pkg
Top 10 Silane Ceramic and Zirconia Repair Kits in Dentistry
2. Porcelain Etch Standard Kit
Porcelain Etch is a viscous 9.5% hydrofluoric acid solution ideal for use prior to cementation and repairs.
- Rinses clean away
- Use with silane after etchant to enhance bonding of resin
Contains: 2 (1.2 ml) porcelain etch syringes, 2 (1.2 ml) silane syringes and 25 Spira-Flo™ brush tips
Package Quantity: 4/Pkg
3. Etch-Ease™ Holding System
The Etch-Ease™ device helps to prepare a porcelain restoration for bonding or cementation. Etch Ease connects to the suction line and, using suction, allows the porcelain restoration to be held in place during the etching process. Rinsing is a breeze and the product provides a safe way to handle porcelain restorations prior to bonding. Using the Etch Ease, the technician is protected and the restoration is kept free of contaminants.
- Autoclavable and reusable
- 3 complete 3-piece units in each package
4. Etch-It® Porcelain Kit 5% for Office
Etch-It® Porcelain Kit 5% is a balanced etching formula effective on all-porcelain crowns and veneers, inlays and onlays. Chemical action is initiated by contact only where the gel is applied and continues until etching is complete. Etching of dental materials creates mechanical retention for successful bonding.
- Will not over-etch delicate restorations
- Easily rinses away when the job is done
- Dip-It color-indicating neutralizer eliminates acid residues
- Complete etching system in a squeeze bottle
- Will not run or drip over margins
5. Programat Sinter Tray, CS4
Programat Sinter Tray is a single layer sintering tray for use in the Programat® S1 and S1 1600.
Package Quantity: 1/Pkg
6. Ceramic Primer II, 3 ml
Ceramic Primer II is a priming agent designed to treat the adhered surface of ceramic and composite prostheses to promote a strong bond to resin-based materials as resin-based cements in case of luting procedures or direct composites in case of repairs.
7. IPS® Natural Die Material by Ivoclar
IPS® Natural Die Material simulates the shade of the prepared tooth and represents the optimum basis for natural shade reproduction when fabricating all-ceramic restorations. This light-curing material is part of the IPS Empress® system.
- Shade ND1 imitates bleached preparations
- Shade ND6 imitates secondary dentin that demonstrates an intensive shade
- Shade ND9 imitates severely discolored/devitalized preparations
8. Gradia® Gum Starter Package
Gradia® Gum is designed to provide shades as seen in the natural gingiva. With this light curing composite, gingiva tissues can be reproduced by means of basic or multiple layering techniques. This composite is used for reproduction of gum tissue for crown restorations, such as implant superstructures, crowns and bridges, and characterization of full and partial dentures.
- Excellent mechanical and physical properties of a micro-filled composite
- Shades are based on natural gingival tissue
- Lifelike aesthetics
- Unlimited possibilities for gingival tissue reproduction
- Compatible with the GC Gradia crown and bridge composite
- Easy to polish and clean
9. Etch-It Porcelain Kit Lab Strength
Etch-It Porcelain Kit Lab Strength is used for etching dental materials, creating mechanical retention for successful bonding. This etching solution is effective on all-porcelain crowns, veneers, inlays and onlays, also for spot etching metal bridgework, porcelain veneers and tooth enamel.
- Dip-It color-indicating neutralizer eliminates acid residues
- Complete etching system in a squeeze bottle
10. Micro-Red® – A.D.S. Inc
Micro-Red® is a quick dry color transfer liquid designed to reveal any high spots. It provides an ultra thin coat with good color transfer, no bleeding and no buildup. The thinner is used if the solution should thicken over a period of time.
